DIGITAL FREESAT FORUM
Here you find everything about the satellites for satellite receivers software, keys, movies, music ..... many other
|
Lista Forumurilor Pe Tematici
|
DIGITAL FREESAT FORUM | Inregistrare | Login
POZE DIGITAL FREESAT FORUM
Nu sunteti logat.
|
Nou pe simpatie:
Diana2019
 | Femeie
25 ani
Vaslui
cauta Barbat
25 - 80 ani |
|
|
dungsot
Membru
Inregistrat: acum 16 ani
Postari: 132
|
|
If you intend to activate Windows
Vista against a KMS server (Enterprise or Business edition only), but having a hard time to
find a working KMS (Key Management Service) server that is public
available on the Internet, it’s possible to install and set up a spoofed
KMS host. This tutorial is a complete guide to properly activate your
Windows Vista with your own local KMS server with pre-built and
pre-installed activated Windows Vista KMS as VMWare virtual appliance
image, without the need to install a KMS yourself.
The following trick instructions incorporate hack that will prevent the
time from changing on the spoofed kms server
virtual machine image (the KMS inside the image has n count of
41, more than exceed the required limit of 25 for the KMS to start
activating the connected Vista PCs),
thus ensuring that there will be always 41 activated computers
registered in the KMS whenever your copy of Windows Vista try to
activate and reactivate. Else the KMS will reduce the n count (the
connected Vista clients) by 1 with a Vista computer doesn’t contact or
call back to the KMS after 30 days, render the KMS useless .as the n
count will fall below 25 which means no activation will be done, unless
you share out the KMS to the public via Internet.
1.] Install Windows Vista Business edition using the valid product
key.
2. Once Windows Vista is installed, install VMWare Player VMware Workstation.
3. Download
Microsoft.Windows.Vista.Local.Activation.Server-MelindaGates torrent
which contains a spoofed KMS server VM image that are activated and has
41 clients connected on the KMS already to by pass the minimum clients
You will need BT client to download the
VMWare image from the torrent.
4. Extract the Windows Vista KMS image downloaded.
5. Open to edit the file “Windows Vista (experimental).vmx” located
in the extracted folder in any text editor. Add the following few lines
to the configuration file:
tools.synchronize.continue=FALSE
tools.synchronize.restore=FALSE
tools.synchronize.resume.disk=FALSE
tools.synchronize.shrink=FALSE
rtc.startTime = “1164286430″
6. Save the edit .vxm file and exit the text editor.
7. Disconnect from Internet or unplug from the router.
8.Reboot and restart the computer.
9.Once computer boot up, open VMWare software you installed, and choose to open (not run)
the Vista KMS server image downloaded.
10. On the right side of the screen, locate the word ‘Ethernet’, and
then double click on it. In the option, choose Host only. (You can
select Bridged mode if you like to share the KMS server with other
computers in the network for activation purpose).
11.Then start the VMWare server to load the Vista KMS server.
VMWare Player loading spoofed KMS server.
12.Optionally, disable Windows Firewall in Windows Vista client
(your own Vista installation that need to be activated) if you facing
any problem.
13. In the VMWare virtual server
environment, disable the KMS server firewall too, and then
reboot the VMWare KMS server.
14. Determine the IP address of the KMS server in VMware virtual
machine, by opening command prompt and execute ‘ipconfig’. Note that the
IP addresses of your Windows Vista computer and Vista KMS server have
to be located on the same subnet allowed by both subnet masks (e.g
192.168.1.1 ad 192.168.1.2 with subnet mask set to 255.255.255.0). You
can check if your computer is able to communicate with KMS server by
pinging the IP address of the KMS server. If server is unreachable (ping
lost), change the IP address of the KMS server or your Vista computer
to be in the same subnet.
15. Right click on Command Prompt icon and choose “Run as Admin” to
open elevated command prompt.
16. Key in the following command:
slmgr -skms <replaced with kms server IP address>
slmgr -ato
or (if above have problem)
cscript c:\windows\system32\slmgr.vbs -skms <replaced with kms server
IP address>
cscript c:\windows\system32\slmgr.vbs -ato
17. Windows Vista should be activated with visual confirmation.
18. You can verify the activation with the following command at
Command Prompt.
slmgr -dlv
or
cscript c:\windows\system32\slmgr.vbs -dlv
or
slmgr -xpr (will show permanently activated)
or
cscript c:\windows\system32\slmgr.vbs -xpr (will show permanently
activated)
19. Stop the VMWare image if you like, but remember to start the
KMS server again after 6 months for re-activation.
|
|
| pus acum 16 ani |
|